NE series NEMA AC motor

PREV YZ YZR Series Crane and Metallurgical 3 Phase Inducti… NEXT YGVF Series Converter Adjustable Speed Roller Table …

  •    · Features and application
    PE series motors are designed and produced strictly according to NEMA standards and the rating outputs, mounting dimensions and electronic mechanical characteristics comply with the NEMA standard requirements. PE series motors, with attractive appearance, perfect production, possess the distinguishing features of light weight, low noise & vibration, large starting torque, strong structure, safety and reliability.
    PE series motor, designed according to NEMA Design B, with Class B or F Insulation, 1.15 service factor, 460/230V rated voltage, 60 Hz rated frequency, are used in the environment without special requirement and the altitude should be lower than 3300 feet above sea level and the ambient temperature not exceeding 40 . They are suitable to drive or to be used as power part of various machinery equipments.
    This series motors can be produced according to users special requirements, for example: NEMA C Design or D Design, various mounting types (such as Type T, TC, TD), Class H Insulation, various voltage or frequency.
     
    Cast iron TEFC Three-phase general purpose
    EPACT compliant
    CSA and ISO9001 certified
    Rigid base with F1 and F2 mounting
    208-230/460V, 460V, 575V, at 60Hz
    Class F insulation, Class B temperature rise
    1.15 Service factor
    C-Face kits available
     
    Three Phase, 60Hz, 208-230/460V, 460V, 575V NEMA Design B, High Efficiency, Squirrel Cage, TEFC, Class F Insulation, 40 Ambient, Continuous Duty, 1.15 Service Factor
  •  
    Three Phase, 60Hz, 208-230/460V, 460V, 575V NEMA Design B, High Efficiency, Squirrel Cage, TEFC, Class F Insulation, 40 Ambient, Continuous Duty, 1.15 Service Factor
     
    HP
    Full Load 
    r/min
    Frame
    Conn.
    Code
    Current at 460V
    Torque
    Efficiency
    Power Factor
    Idle
    Full load
    (A)
    Locked rotor
    (A)
    Full load
    (LB-FT)
    Locked rotor
    %
    Break down
    %
    Full load
    %
    3/4 load
    %
    1/2 load
    %
    Full load
    %
    3/4 load
    %
    1/2 load
    %
    1
    1150
    145T
    2Y/Y
    G
    1.24
    1.75
    15
    4.57
    220
    265
    80.0
    79.5
    77.5
    68.0
    59.4
    46.5
    1
    1735
    143T
    2Y/Y
    J
    0.80
    1.52
    15
    3.03
    320
    320
    82.5
    82.4
    81.0
    77.0
    71.2
    58.1
    1.5
    1150
    182T
    2Y/Y
    H
    1.49
    2.2
    20
    6.85
    175
    280
    85.5
    85.0
    83.3
    75.0
    68.2
    55.2
    1.5
    1735
    145T
    2Y/Y
    H
    1.22
    2.2
    20
    4.54
    320
    320
    84.0
    83.9
    82.6
    77.0
    71.7
    58.4
    1.5
    3450
    143T
    2Y/Y
    H
    0.94
    2.0
    20
    2.28
    320
    330
    82.5
    82.1
    80.6
    84.0
    77.5
    65.6
    2
    1150
    184T
    2Y/Y
    H
    1.85
    3.0
    25
    9.14
    195
    280
    86.5
    86.1
    84.5
    75.0
    69.1
    56.2
    2
    1735
    145T
    2Y/Y
    G
    1.51
    2.8
    25
    6.06
    300
    300
    84.0
    84.5
    84.0
    79.0
    75.4
    62.9
    2
    3450
    145T
    2Y/Y
    H
    1.20
    2.7
    25
    3.05
    320
    330
    84.0
    83.6
    82.1
    84.0
    78.0
    66.3
    3
    1170
    213T
    2Y/Y
    J
    2.63
    4.2
    32
    13.47
    180
    220
    87.5
    87.1
    85.4
    75.0
    67.3
    54.1
    3
    1755
    182T
    2Y/Y
    K
    2.15
    4.1
    32
    8.98
    220
    300
    87.5
    87.4
    86.3
    82.0
    76.8
    64.8
    3
    3510
    182T
    2Y/Y
    J
    1.40
    3.8
    32
    4.49
    170
    300
    85.5
    86.0
    85.4
    87.0
    85.1
    76.2
    5
    1165
    215T
    2Y/Y
    H
    3.77
    7.1
    46
    22.55
    180
    220
    87.5
    87.7
    86.9
    77.0
    72.5
    60.0
    5
    1750
    184T
    2Y/Y
    J
    3.17
    6.5
    46
    15.01
    190
    270
    87.5
    88.1
    87.7
    83.0
    80.0
    68.8
    5
    3510
    184T
    2Y/Y
    J
    1.75
    6.1
    46
    7.48
    170
    280
    87.5
    88.0
    87.9
    88.0
    88.5
    81.8
    7.5
    1170
    254T
    2Δ/Δ
    G
    5.20
    10.6
    64
    33.68
    180
    220
    89.5
    89.2
    87.9
    75.0
    69.5
    57.5
    7.5
    1750
    213T
    2Δ/Δ
    H
    3.49
    9.4
    64
    22.51
    185
    240
    89.5
    89.9
    89.8
    84.0
    83.2
    74.3
    7.5
    3520
    213T
    2Δ/Δ
    G
    2.37
    8.9
    64
    11.19
    175
    280
    88.5
    89.1
    89.0
    89.0
    90.6
    85.2
    10
    1170
    256T
    2Δ/Δ
    G
    6.83
    13.7
    81
    44.90
    170
    220
    89.5
    89.7
    88.6
    76.0
    70.9
    58.7

     

    HP
    Full Load 
    r/min
    Frame
    Conn.
    Code
    Current at 460V
    Torque
    Efficiency
    Power Factor
    Idle
    Full load
    (A)
    Locked rotor
    (A)
    Full load
    (LB-FT)
    Locked rotor
    %
    Break down
    %
    Full load
    %
    3/4 load
    %
    1/2 load
    %
    Full load
    %
    3/4 load
    %
    1/2 load
    %
    10
    1750
    215T
    2Δ/Δ
    G
    4.53
    12.5
    81
    30.02
    195
    220
    89.5
    90.4
    90.5
    84.0
    85.2
    77.6
    10
    3520
    215T
    2Δ/Δ
    H
    2.80
    11.6
    81
    14.92
    180
    270
    89.5
    90.1
    90.1
    89.0
    91.5
    86.8
    15
    1175
    284T
    2Δ/Δ
    G
    7.80
    19.3
    116
    67.07
    165
    220
    90.2
    90.1
    89.5
    81.0
    78.7
    68.3
    15
    1760
    254T
    2Δ/Δ
    G
    7.75
    18.6
    116
    44.77
    185
    220
    91.0
    90.7
    89.8
    83.0
    81.4
    71.4
    15
    3540
    254T
    2Δ/Δ
    G
    4.35
    17.6
    116
    22.27
    180
    240
    90.2
    89.6
    88.9
    89.0
    89.0
    83.5
    20
    1175
    286T
    2Δ/Δ
    F
    8.35
    25.8
    145
    89.42
    150
    210
    90.2
    90.3
    90.2
    81.0
    81.9
    73.9
    20
    1760
    256T
    2Δ/Δ
    G
    9.20
    24.8
    145
    59.70
    180
    220
    91.0
    91.8
    91.5
    84.0
    85.0
    77.6
    20
    3530
    256T
    2Δ/Δ
    F
    5.17
    23.2
    145
    29.76
    160
    220
    90.2
    89.6
    89.5
    90.0
    90.8
    87.0
    25
    1180
    324T
    2Δ/Δ
    F
    11.50
    31.9
    183
    111.30
    150
    200
    91.7
    91.7
    91.2
    82.0
    80.6
    71.7
    25
    1770
    284T
    2Δ/Δ
    G
    10.50
    29.6
    183
    74.20
    170
    220
    92.4
    91.7
    91.1
    86.0
    83.4
    74.7
    25
    3550
    284TS
    2Δ/Δ
    F
    6.60
    28.9
    183
    37.00
    170
    220
    91.0
    91.0
    90.7
    90.0
    89.9
    85.1
    30
    1180
    326T
    2Δ/Δ
    F
    14.76
    38.0
    218
    133.56
    150
    200
    91.7
    91.8
    91.4
    83.0
    81.1
    72.7
    30
    1770
    286T
    2Δ/Δ
    F
    12.00
    35.5
    218
    89.04
    170
    220
    92.4
    92.1
    91.6
    86.0
    84.5
    76.5
    30
    3550
    286TS
    2Δ/Δ
    F
    7.70
    34.5
    218
    44.40
    170
    230
    91.0
    91.1
    90.9
    90.0
    90.2
    85.7
    40
    1180
    364T
    2Δ/Δ
    F
    14.30
    47.4
    290
    178.08
    160
    200
    93.0
    93.0
    92.6
    85.0
    83.0
    75.6
    40
    1770
    324T
    2Δ/Δ
    E
    11.50
    47.1
    290
    118.72
    160
    200
    93.0
    92.2
    91.1
    87.0
    83.9
    77.8
    40
    3560
    324TS
    2Δ/Δ
    G
    11.80
    46.5
    290
    59.07
    180
    220
    91.7
    91.2
    90.3
    90.0
    86.5
    79.9
    50
    1180
    365T
    2Δ/Δ
    F
    20.41
    59.2
    363
    222.60
    160
    200
    93.0
    93.1
    92.8
    85.0
    84.0
    77.5
    50
    1770
    326T
    2Δ/Δ
    E
    13.70
    59.2
    363
    148.40
    165
    200
    93.0
    92.1
    91.2
    87.0
    84.1
    78.2
    50
    3560
    326TS
    2Δ/Δ
    F
    13.51
    58.5
    363
    73.78
    160
    210
    92.4
    91.5
    90.7
    90.0
    87.6
    81.9
    60
    1185
    404T
    2Δ/Δ
    F
    21.90
    70.0
    435
    266.00
    150
    200
    93.6
    93.7
    93.4
    86.0
    85.2
    78.7
    60
    1775
    364T
    2Δ/Δ
    F
    19.00
    69.4
    435
    177.58
    160
    210
    93.6
    93.4
    92.9
    87.0
    86.3
    80.2
    60
    3560
    364TS
    2Δ/Δ
    F
    12.50
    67.5
    435
    88.55
    160
    210
    93.0
    92.3
    91.7
    90.0
    92.1
    89.0
    75
    1185
    405T
    2Δ/Δ
    F
    30.24
    87.7
    543
    332.50
    150
    200
    93.6
    93.8
    93.6
    86.0
    86.5
    81.0
    75
    1775
    365T
    2Δ/Δ
    F
    20.50
    86.2
    543
    221.98
    160
    200
    94.1
    93.5
    93.2
    87.0
    87.4
    82.4
    75
    3560
    365TS
    2Δ/Δ
    E
    16.50
    84.3
    543
    110.69
    140
    200
    93.0
    92.4
    92.0
    90.0
    92.1
    89.9
    100
    1180
    444T
    2Δ/Δ
    F
    40.20
    116
    725
    445.20
    120
    200
    94.1
    94.0
    93.4
    86.0
    85.1
    78.7
    100
    1780
    405T
    2Δ/Δ
    F
    30.20
    114
    725
    295.17
    150
    200
    94.5
    94.3
    93.9
    87.0
    87.6
    82.0
    100
    3570
    405TS
    2Δ/Δ
    F
    26.60
    100
    725
    147.19
    130
    200
    93.6
    93.5
    93.1
    91.0
    92.3
    89.2
    125
    1180
    445T
    2-Δ
    F
    48.60
    145
    908
    556.51
    130
    200
    94.1
    94.1
    93.6
    86.0
    85.5
    79.6
    125
    1780
    444T
    2-Δ
    F
    38.32
    141
    908
    368.93
    190
    210
    94.5
    94.4
    94.1
    88.0
    90.8
    87.3
    125
    3575
    444TS
    2-Δ
    F
    29.14
    137
    908
    183.70
    130
    210
    94.5
    93.9
    93.2
    91.0
    92.7
    89.7
    150
    1180
    447T
    2-Δ
    F
    58.70
    170
    1085
    667.80
    140
    210
    95.0
    94.5
    94.0
    87.0
    85.3
    78.8
    150
    1780
    445T
    2-Δ
    F
    46.20
    169
    1085
    442.74
    200
    210
    95.0
    94.6
    94.2
    88.0
    90.9
    87.5
    150
    3575
    445TS
    2-Δ
    F
    38.00
    164
    1085
    220.42
    130
    210
    94.5
    94.0
    93.3
    91.0
    93.0
    90.0
    200
    1780
    447T
    2-Δ
    F
    57.94
    223
    1450
    590.25
    200
    210
    95.0
    94.7
    94.3
    89.0
    91.3
    88.3
    200
    3575
    447TS
    Δ
    F
    49.00
    215
    1450
    293.90
    120
    200
    95.0
    94.4
    93.9
    92.0
    94.4
    92.9
     
    NOTE: For current at 230V, multiple above values by 2.
  •  

    Frame
    MOUNTING
    A
    B
    C
    D
    G
    J
    L
    M
    O
    P
    R
    S
    T
    W
    AB
    AC
    SHAFT
    EXTENSION
    BEARINGS
    E
    F
    H
    BA
    N-W
    U
    V
    DRIVE
    END
    OPPOSITE
    DRIVE END
    143T
    2.75
    2.0
    0.34
    2.25
    7.0
    6.0
    12.5
    3.5
    0.512
    1.45
    6.05
    3.976
    7.7
    7.4
    0.771
    0.188
    0
    0.14
    6.5
    4.72
    2.25
    7/8
    2.00
    6205
    6205
    145T
    2.75
    2.5
    0.34
    2.25
    7.0
    6.0
    13.5
    3.5
    0.512
    1.45
    6.55
    4.469
    7.7
    7.4
    0.771
    0.188
    0
    0.14
    6.5
    4.72
    2.25
    7/8
    2.00
    6205
    6205
    182T
    3.75
    2.25
    0.41
    2.75
    9.0
    6.5
    15.3
    4.5
    0.669
    2.04
    7.35
    4.77
    9.0
    9.37
    0.986
    0.250
    1.58
    0.14
    7.48
    4.53
    2.75
    1 1/8
    2.50
    6306
    6306
    184T
    3.75
    2.75
    0.41
    2.75
    9.0
    7.5
    16.0
    4.5
    0.669
    2.04
    7.85
    5.276
    9.0
    9.37
    0.986
    0.250
    1.58
    0.14
    7.48
    4.53
    2.75
    1 1/8
    2.50
    6306
    6306
    213T
    4.25
    2.75
    0.41
    3.50
    10.5
    7.5
    19.0
    5.25
    0.787
    2.45
    9.25
    5.945
    10.5
    10.9
    1.201
    0.312
    1.97
    0.14
    8.27
    7.09
    3.38
    1 3/8
    3.12
    6208
    6208
    215T
    4.25
    3.50
    0.41
    3.50
    10.5
    9.0
    22.5
    5.25
    0.787
    2.45
    10.1
    6.693
    10.5
    10.9
    1.201
    0.312
    1.97
    0.14
    8.27
    7.09
    3.38
    1 3/8
    3.12
    6208
    6208
    254T
    5.0
    4.125
    0.53
    4.25
    12.5
    10.8
    23.4
    6.25
    0.866
    2.87
    10.9
    7.992
    12.8
    13.0
    1.416
    0.375
    2.35
    0.14
    10.43
    8.07
    4
    1 5/8
    3.75
    6309
    6309
    256T
    5.0
    5.0
    0.53
    4.25
    12.5
    12.5
    25.1
    6.25
    0.866
    2.87
    11.8
    8.858
    12.8
    13.0
    1.416
    0.375
    2.35
    0.14
    10.43
    8.07
    4
    1 5/8
    3.75
    6309
    6309
    284T
    5.5
    4.75
    0.53
    4.75
    14.0
    12.5
    28.0
    7.0
    0.80
    2.756
    13.75
    9.356
    14.5
    14.1
    1.591
    0.375
    2.35
    0.144
    13.78
    8.46
    4.62
    1 7/8
    4.38
    6310
    6310
    284TS
    5.5
    4.75
    0.53
    4.75
    14.0
    12.5
    26.5
    7.0
    0.80
    2.756
    13.75
    9.356
    14.5
    14.1
    1.416
    0.50
    2.35
    0.144
    13.78
    8.46
    3.25
    1 5/8
    3.00
    6310
    6310
    286T
    5.5
    5.5
    0.53
    4.75
    14.0
    14.0
    29.5
    7.0
    0.80
    2.756
    14.5
    10.106
    14.5
    14.1
    1.591
    0.375
    2.35
    0.144
    13.78
    8.46
    4.62
    1 7/8
    4.38
    6310
    6310
    286TS
    5.5
    5.5
    0.53
    4.75
    14.0
    14.0
    28.0
    7.0
    0.80
    2.756
    14.5
    10.106
    14.5
    14.1
    1.416
    0.50
    2.35
    0.144
    13.78
    8.46
    3.25
    1 5/8
    3.00
    6310
    6310
    324T
    6.25
    5.25
    0.66
    5.25
    16.0
    14.0
    30.3
    8.0
    1.11
    2.756
    14.55
    10.309
    16.0
    15.63
    1.045
    0.50
    2.50
    0.191
    14.76
    10.63
    5.25
    2 1/8
    5.00
    6312
    6312
    324TS
    6.25
    5.25
    0.66
    5.25
    16.0
    14.0
    28.8
    8.0
    1.11
    2.756
    14.55
    10.309
    16.0
    15.63
    1.591
    0.50
    2.50
    0.191
    14.76
    10.63
    3.75
    1 7/8
    3.50
    6312
    6312
    326T
    6.25
    6.0
    0.66
    5.25
    16.0
    15.5
    31.8
    8.0
    1.11
    2.756
    15.3
    11.059
    16.0
    15.63
    1.845
    0.50
    2.50
    0.191
    14.76
    10.63
    5.25
    2 1/8
    5.00
    6312
    6312
    326TS
    6.25
    6.0
    0.66
    5.25
    16.0
    15.5
    30.3
    8.0
    1.11
    2.756
    15.3
    11.059
    16.0
    15.63
    1.591
    0.50
    2.50
    0.191
    14.76
    10.63
    3.75
    1 7/8
    3.50
    6312
    6312
    364T
    7.0
    5.625
    0.66
    5.88
    18.0
    15.5
    33.15
    9.0
    1.25
    2.953
    15.765
    11.3
    18.25
    17.56
    2.021
    0.625
    2.50
    0.205
    16.14
    12.60
    5.88
    2 3/8
    5.62
    6314
    6314
    364TS
    7.0
    5.625
    0.66
    5.88
    18.0
    15.2
    31.02
    9.0
    1.25
    2.953
    15.765
    11.3
    18.25
    17.56
    1.591
    0.50
    2.50
    0.205
    16.14
    12.60
    3.75
    1 7/8
    3.50
    6314
    6314
    365T
    7.0
    6.125
    0.66
    5.88
    18.0
    16.2
    34.15
    9.0
    1.25
    2.953
    16.265
    11.8
    18.25
    17.56
    2.021
    0.625
    2.50
    0.205
    16.14
    12.60
    5.88
    2 3/8
    5.62
    6314
    6314
    365TS
    7.0
    6.125
    0.66
    5.88
    18.0
    16.2
    32.02
    9.0
    1.25
    2.953
    16.265
    11.8
    18.25
    17.56
    1.591
    0.50
    2.50
    0.205
    16.14
    12.60
    3.75
    1 7/8
    3.50
    6314
    6314
    404T
    8.0
    6.125
    0.81
    6.62
    20.0
    16.2
    37.0
    10.0
    1.34
    3.15
    17.005
    12.58
    20.0
    19.0
    2.45
    0.75
    2.50
    0.165
    18.11
    12.20
    7.25
    2 7/8
    7.00
    6316
    6316
    404TS
    8.0
    6.125
    0.81
    6.62
    20.0
    16.2
    34.0
    10.0
    1.34
    3.15
    17.005
    12.58
    20.0
    19.0
    1.845
    0.50
    2.50
    0.165
    18.11
    12.20
    4.25
    2 1/8
    4.00
    6316
    6316
    405T
    8.0
    6.875
    0.81
    6.62
    20.0
    17.8
    38.5
    10.0
    1.34
    3.15
    17.755
    13.33
    20.0
    19.0
    2.45
    0.75
    2.50
    0.165
    18.11
    12.20
    7.25
    2 7/8
    7.00
    6316
    6316
    405TS
    8.0
    6.875
    0.81
    6.62
    20.0
    17.8
    35.5
    10.0
    1.34
    3.15
    17.755
    13.33
    20.0
    19.0
    1.845
    0.50
    2.50
    0.165
    18.11
    12.20
    4.25
    2 1/8
    4.00
    6316
    6316
    444T
    9.0
    7.25
    0.81
    7.5
    22.0
    18.5
    42.75
    11.0
    1.38
    3.35
    19.5
    14.4
    21.75
    21.6
    2.88
    0.875
    2.91
    0.35
    19.49
    14.76
    8.5
    3 3/8
    8.25
    NU318
    6316
    444TS
    9.0
    7.25
    0.81
    7.5
    22.0
    18.5
    39.0
    11.0
    1.38
    3.35
    19.5
    14.1
    21.75
    21.6
    2.021
    0.625
    2.91
    0.65
    19.49
    14.76
    4.75
    2 3/8
    4.50
    6316
    6316
    Frame
    MOUNTING
    A
    B
    C
    D
    G
    J
    L
    M
    O
    P
    R
    S
    T
    W
    AB
    AC
    SHAFT
    EXTENSION
    BEARINGS
    E
    F
    H
    BA
    N-W
    U
    V
    DRIVE
    END
    OPPOSITE
    DRIVE END
    445T
    9.0
    8.25
    0.81
    7.5
    22.0
    20.5
    44.75
    11.0
    1.38
    3.35
    20.5
    15.4
    21.75
    21.6
    2.88
    0.875
    2.91
    0.35
    19.49
    14.76
    8.5
    3 3/8
    8.25
    NU318
    6316
    445TS
    9.0
    8.25
    0.81
    7.5
    22.0
    20.5
    41.0
    11.0
    1.38
    3.35
    20.5
    15.1
    21.75
    21.6
    2.021
    0.625
    2.91
    0.65
    19.49
    14.76
    4.75
    2 3/8
    4.50
    6316
    6316
    447T
    9.0
    10.0
    0.81
    7.5
    22.0
    24.0
    48.25
    11.0
    1.38
    3.35
    22.25
    17.15
    21.75
    21.6
    2.88
    0.875
    2.91
    0.35
    19.49
    14.76
    8.5
    3 3/8
    8.25
    NU320
    6316
    447TS
    9.0
    10.0
    0.81
    7.5
    22.0
    24.0
    44.5
    11.0
    1.38
    3.35
    22.25
    16.85
    21.75
    21.6
    2.021
    0.625
    2.91
    0.65
    19.49
    14.76
    4.75
    2 3/8
    4.50
    6316
    6316
    449T
    9.0
    12.5
    0.81
    7.5
    22.0
    29.0
    53.25
    11.0
    1.0
    3.15
    24.75
    19.65
    21.75
    21.6
    2.88
    0.875
    4.25
    0.35
    19.49
    14.76
    8.5
    3 3/8
    8.25
    NU320
    6316
    449TS
    9.0
    12.5
    0.81
    7.5
    22.0
    29.0
    49.5
    11.0
    1.0
    3.15
    24.75
    19.35
    21.75
    21.6
    2.021
    0.625
    4.25
    0.65
    19.49
    14.76
    4.75
    2 3/8
    4.50
    6316
    6316
    447TZ
    9.0
    10.0
    0.81
    7.5
    22.0
    24.0
    50.0
    11.0
    1.38
    3.35
    22.25
    17.15
    21.75
    21.6
    2.88
    0.875
    2.91
    0.35
    19.49
    14.76
    10 1/8
    3 3/8
    9.875
    NU320
    6316
    449TZ
    9.0
    12.5
    0.81
    7.5
    22.0
    29.0
    55.0
    11.0
    1.0
    3.15
    24.75
    19.35
    21.75
    21.6
    2.88
    0.875
    4.25
    0.35
    19.49
    14.76
    10 1/8
    3 3/8
    9.875
    NU320
    6318
     
    ALL DATA SUBJECT TO CHANGE WITHOUT NOTICE. USE ONLY CERTIFIED DATA FOR CONSTRUCTION PURCHASES.
     
     
    FRAME
    AJ
    AK
    BA
    MIN
    BB
    BC
    MAX
    BD
    NUMBER
    OF HOLE
    SCREW
    DEPTH
    OF HOLE
    U
    AH
    R
    ES
    S
    143T 145TC
    5.875
    4.500
    2.75
    0.16
    0.12
    6.50
    4
    3/8-16
    0.56
    0.875
    2.12
    0.771
    1.41
    0.188
    182TC.184TC
    7.250
    8.500
    3.50
    0.25
    0.12
    9.00
    4
    1/2-13
    0.75
    1.125
    2.62
    0.986
    1.78
    0.250
    182TC.184TC
    5.875
    4.500
    3.50
    0.16
    0.12
    6.50
    4
    3/8-16
    0.56
    1.125
    2.62
    0.986
    1.78
    0.250
    213TC.215TC
    7.250
    8.500
    4.25
    0.25
    0.25
    9.00
    4
    1/2-13
    0.75
    1.375
    3.12
    1.201
    2.41
    0.312
    254TC.256TC
    7.250
    8.500
    4.75
    0.25
    0.25
    10.00
    4
    1/2-13
    0.75
    1.625
    3.75
    1.416
    2.91
    0.375
    284TC.286TC
    9.000
    10.500
    4.75
    0.25
    0.25
    11.25
    4
    1/2-13
    0.75
    1.875
    4.38
    1.591
    3.28
    0.500
    284TSC.286TSC
    9.000
    10.500
    4.75
    0.25
    0.25
    11.25
    4
    1/2-13
    0.75
    1.625
    3.00
    1.416
    1.91
    0.375
    324TC.326TC
    11.000
    12.500
    5.25
    0.25
    0.25
    14.00
    4
    5/8-11
    0.94
    2.125
    5.00
    1.845
    3.91
    0.500
    324TSC.326TSC
    11.000
    12.500
    5.25
    0.25
    0.25
    14.00
    4
    5/8-11
    0.94
    1.875
    3.50
    1.591
    2.03
    &, lt;, FO, or="#000000" col, NT,>0.500
    364TC.365TC
    11.000
    12.500
    5.88
    0.25
    0.25
    14.00
    8
    5/8-11
    0.94
    2.375
    5.62
    2.021
    4.28
    0.625
    364TSC.365TSC
    11.000
    12.500
    5.88
    0.25
    0.25
    14.00
    8
    5/8-11
    0.94
    1.875
    3.50
    1.591
    2.03
    0.500
    404TC.405TC
    11.000
    12.500
    6.62
    0.25
    0.25
    15.50
    8
    5/8-11
    0.94
    2.875
    7.00
    2.450
    5.65
    0.750
    404TSC.405TSC
    11.000
    12.500
    6.62
    0.25
    0.25
    15.50
    8
    5/8-11
    0.94
    2.125
    4.00
    1.845
    2.78
    0.500
    444TC.445TC
    14.000
    16.000
    7.50
    0.25
    0.25
    18.00
    8
    5/8-11
    0.94
    3.375
    8.25
    2.880
    6.91
    0.875
    444TSC.445TSC
    14.000
    16.000
    7.50
    0.25
    0.25
    18.00
    8
    5/8-11
    0.94
    2.375
    4.50
    2.021
    3.03
    0.625
    447TC.449TC
    14.000
    16.000
    7.50
    0.25
    0.25
    18.00
    8
    5/8-11
    0.94
    2.375
    8.25
    2.880
    6.91
    0.875
    447TSC.449TSC
    14.000
    16.000
    7.50
    0.25
    0.25
    18.00
    8
    5/8-11
    0.94
    2.375
    4.50
    2.021
    3.03
    0.625
    NOTE:
    1. Tolerance on dimension D: +0.00inch, -1/32 inch for frame 143~326; +0.00 inch -1/16 inch for frames 364~449.
    2. Tolerance on shaft diameter U: +0.0000 inch, -0.0005 inch for frames 143~215; +0.000 inch, 0.001 inch for frame 254~449.
    3. Tolerance on dimension R: +0.000 inch, -0.015 inch.
    4. Dimension V is length of straight part shaft.
    5. The conduit box can be rotated 90° increments so that conduit can be received from any direction. Conduit box can be located on either side of the motor.
    6. The last letter "Z" designated suitability for belt drive application.
  • Useful Links

  • Request Quote

  •  Contact Us

     Mobile/ WhatsApp/ Wechat:
               +86-13585754942

     Tel: +86-21-68783060
               Fax: +86-21-68780003, 68783092

     sales@china-electric.net
               sales@fortunelectric.com

  • Certificates


TALK TO USMobile/ WhatsApp/ Wechat:
+86-13585754942  
Call us now!
LIVE CHAT
GET IN TOUCHsales@china-electric.net
sales@fortunelectric.com